C7 & C9 socket repair

Please Match the wire size to the socket size (example if using spt-1 wire use spt1 sockets, If using spt-2 wire, use spt2 sockets.) FYI: The only difference between SPT1 &SPT2 is that SPT-2 has thicker insulation around wire, therefore the openings for SPT2 accessories is wider to accommodate for thicker insulation around wire.

Side Note:

On our sockets.

1. One vampire tooth is connected to the terminal on the side wall of the socket, this is is generally pierced into to the ribbed (nuetral) side of wire.

2. One vampire tooth is connect to the bottom contact in the socket, this is the hot (or Line) terminal and  usually pierced to the smooth side of wire.